Computers Canada
Shielding sources equal or higher than 150A to achieve 1.26µT
(IEC EN 61000-4-8 Level 1)
Shielding substation, UPS room and part of the distribution
Shielding “C15” electrical room to protect adjacent areas
Shielding substations and riser ducts in compliance with Italian DPCM 7/8/2003
-EMPIRICAL RESEARCH - DESIGN AND INSTALLATION OF SHIELDING SYSTEMS
“G-iron® dreams by day to be cognizant of many things that escape those who dream only by night” (Edgar e Marco)
Marco Alvelli
CEO
-EMPIRICAL RESEARCH - DESIGN AND INSTALLATION OF SHIELDING SYSTEMS
“G-iron® dreams by day to be cognizant of many things that escape those who dream only by night” (Edgar e Marco)
Marco Alvelli
CEO
- A new frontier in shielding -
G-iron MRI® is a unique and multifunctional product for static field shielding from 0 Hz to 1 GHz.
- How we design - From theory to turnkey
Preliminary Consultancy
Preliminary Consultancy
Collection of initial project data in its entirety: type of building, intended use of the premises, construction times and estimated timetable.
Study of the location and type of electrical sources present in the premises, sharing the protection objectives with the Customer in compliance with the law (Prime Ministerial Decree 8/7/2003 for Italy, or the existing laws of the country in which the work will be carried out), consultancy on possible shielding solutions aiming for maximum optimization and effectiveness of the project.
3D Simulation
3D Simulation
Analysis of the electrical sources and the magnetic induction they generate with the aid of the certified three-dimensional software EFC400 by Narda STS. The software has a vast library that allows you to input the exact configuration of the technical rooms involved, and analyzes multiple sources simultaneously in order to also take into account any possible magnetic linkage.
The result, both in 2D and 3D, allows us to evaluate the EMI and, consequently, give the Customer or Partner additional advice and support on the best solution to adopt.
Project Design
Project Design
Creation of technical drawings with indication of the positioning, type and size of the shielding. The drawings are accompanied by a technical report which summarizes the project data, the indications received from the Customer and any notes regarding the installation method of the
G-iron® shielding system.
Preparation of the shielding system
Preparation of the shielding system
The executive project is shared with the Customer and subsequently created in the workshop: from the preparation of the flat shielding to the development of customized solutions,
G-iron® knows how to promptly respond to any need.
Installation
Installation
The material is shipped directly to the construction site and installed by workers trained at our headquarters in Arezzo. A G-iron® technician is available on the agreed day of the intervention to provide, remotely or on site, all the support necessary to complete the work according to the project. At the end of the intervention, the design conformity documents and the guarantee seal will be issued to the Customer.
Final Commissioning
Final Commissioning
Once the setup of the electrical room/the places subject to shielding has been completed and the electrical systems are live, a test measurement is carried out with special instrumentation (EHP-50G by Narda STS) to further certify the protection of the areas surrounding the electrical source(s).
- News -
News from G-iron®
Udine Hospital
G-iron Shielding System at Snam HQ
G-iron in Palazzo Raggi